Jet Tec Inkjet and Toner Catridges

Jet Tec Inkjet offers a cost-effective way of refilling many ink cartridges, including carts from: Apollo, Apple, Brother, Canon, Compaq, Epson, Hewlett Packard, Lexmark, Olivetti, Samsung, Sharp, Xerox, BT and OKI. In fact Jet Tec ink kits can be used on any sealed ink cartridge, black, 3 colour, single colour and now even photo colour refill inks are available.

Jet Tec Inkjet and Jet Tec Toner Catridge refill kits contain ink, cleaning fluid, tools and instructions to allow you to refill your ink cartridges. Additionally, Jet Tec bulk inks are available to top up your kit. Printer inks are available in black, cyan, magenta, yellow and the two additional photo cartridge colours.

Jet Tec Inkjet and Toner Catridges Refill Tips

• Remove cartridge from printer before refilling.
• Conduct the refilling operation over a protected surface, such as a kitchen sink or work bench, to avoid spills.
• To fill the syringe, remove protective cover from the needle and insert through the seal on the bottle. Pull back on plunger and remove from ink bottle slowly.
• The best time to refill a cartridge is before it is completely empty. Do not refill a cartridge that has been emptied for longer than 2 weeks.
• Be very careful not to put the wrong colour ink into the cartridge. You can identify the colour in a chamber by inserting the injector into the chamber and withdrawing a small amount of ink to visually verify the colour. Remember Magenta is the technical name for Red and Cyan is the technical name for Blue.
• When filling a sponge cartridge, it's best to back off or withdraw a small amount of ink when the cartridge becomes full. The object is to saturate the sponge, not have it floating in ink. It's better to under fill, than to overfill.
• Refilling a cartridge before it runs out of ink prevents the print head from burning out and extends the life of sponge filled cartridges.
• Handle cartridges carefully and avoid touching metallic parts. To store ink cartridges fill and then leave at room temperature in a sealed zip lock plastic bag.
• Storage procedure for inkjet cartridges with a print head on them: after refilling, wipe the head clean with a paper towel that has been saturated with Inkjet Cleaning Fluid. And again before use, to remove any dried ink which may block them.